Detcon TP Transmitter Test Fixture User Manual

Detcon Model TP Transmitter Test FixtureOperators Instruction ManualOctober 15, 2007 * Document 3390 * Revision 1.0DETCON, Inc.3200 Research Forest Dr

Detcon Model TP Transmitter Test FixturePage 2 of 9Table of Contents1.0 Description2.0 Features3.0 Specifications4.0 Operation5.0 Test Fixture Ca

Detcon Model TP Transmitter Test FixturePage 3 of 91.0 DescriptionThe Detcon Model TP Transmitter Test Fixture is designed to test the operation of De

Detcon Model TP Transmitter Test FixturePage 4 of 93.0 SpecificationsCompatible with the Following Models Model Series TP-424x, TP-524x, TP-550x, T

Detcon Model TP Transmitter Test FixturePage 5 of 93 - Check the heater voltage. Insert DVM probes into the VOLT “+” and “–“ test points.Adjust the TE

Detcon Model TP Transmitter Test FixturePage 6 of 9a) At the transmitter, enter the programming menu by holding the programmingmagnet stationary over

Detcon Model TP Transmitter Test FixturePage 7 of 9NOTE: The OPEN FILM function of SW1 is not compatible with the TP-524xtransmitter.4.3 TP-550x and

Detcon Model TP Transmitter Test FixturePage 8 of 9programming magnet. Note that the CAL LED is illuminated and that the mAOutput LED meter on the tes

Detcon Model TP Transmitter Test FixturePage 9 of 9of shipment to the original purchaser and ends two years thereafter. Should the testfixture fail to